Mouse
Azam SEO
Dezember 6, 2021

IP-Adresse des Wi-Fi-Routers mit dem Computer ändern - einfache Anleitung

How Can You Change the IP Address of Your Wi-Fi Router Using a Computer?

If you want to change your Wi-Fi router IP address using your computer, you’re in the right place! Changing the IP address can help you solve network problems, improve security, or set up a new network configuration. In this guide, you’ll learn how to do it easily and safely in just a few steps.

1. Understand Which IP You Want to Change

First, it’s important to know:

Public IP Address: The one your internet provider gives you.
Private IP Address: The local address your router uses inside your home network (like 192.168.1.1).

👉 Learn more about Public vs. Private IP Addresses.

2. Connect to Your Router

Make sure your computer is connected to the router via Wi-Fi or an Ethernet cable. Then:

Open a web browser (like Chrome, Firefox, or Edge).
Type your router’s IP address into the address bar. Usually, it’s something like:
- 192.168.1.1
- 192.168.0.1
- 10.0.0.1
Press Enter.

If you don’t know your router’s IP:

On Windows, open Command Prompt and type ipconfig, then look for “Default Gateway” (how to use ipconfig).
On Mac, open Terminal and type netstat -nr | grep default (macOS network troubleshooting).

3. Log into Your Router

You’ll be asked for a username und password.

Common defaults are:
- Username: admin
- Password: admin or password

(If you changed the password and forgot it, you may need to reset your router.)

4. Find the Network Settings

Once you’re inside the router’s dashboard:

Look for Network Settings, LAN Settings, or Basic Setup.
You should find a section showing the router’s IP Address.

Every router menu is a little different. For help with specific brands:

Netgear router manuals
TP-Link support page
Linksys router guides

5. Change the Router’s IP Address

Type the new IP address you want (for example, change from 192.168.1.1 zu 192.168.2.1).
Save the settings.

⚡ Important: After saving, your router will reboot, and you might get disconnected for a few seconds or minutes.

You will now have to reconnect using the new IP address.

6. (Optional) How to Change Your Public IP Address

If you also want a new public IP:

Restart your modem: Unplug it for 5–10 minutes. Sometimes, your Internet Service Provider (ISP) will assign a new IP when it reconnects.
Contact your ISP: Some providers can manually change your IP. Here’s a guide to how to change your IP address.
Use a VPN: A VPN (Virtual Private Network) can mask your real IP address quickly without needing to modify your router.

Final Tips:

Always write down the original settings before making changes.
Be careful: setting the wrong IP or conflicting addresses might break your network temporarily.
If you lose access, reset your router using the small “Reset” button (usually you press it with a pin for 10 seconds).

other topics related to this articl:

Informatique et Impressions

YouTubehellotech.com+3YouTube+3YouTube+3